Large Scale Kits

Highly detailed single track links Variant of Type 6(a) track Fully workable For use on Panzer III and StuG III 192 single track links included

The German Pz.kpfw II (Sd.Kfz. 121) Ausf. B Modified is the next 1/16th scale kit. Depicted in the time of early part of WWII, in the French campaign

Hasegawa 52110 1/8 Scale Vickers .303 Machine Gun Model -1915

Dimensions - Length 146mm.

Vickers machine guns were .303 caliber (7.7 mm), recoil-operated, water-cooled medium machine guns that the British developed and used primarily during World War I. The weapon was capable of firing up to 600 rounds a minute and, with an experienced crew, spare barrels and ample ammunition, was capable of maintaining that rate of fire for twelve hours. That endurance ensured that the guns were used on land, sea and in the air from 1912 to 1968. This limited edition kit features a finely-modeled gun with display frame.

Model Dimension Length: 283.6mm Width: 133.2mm Height: mm Total Plastic Parts 640+ Total Sprues 17 sprues , turret and tracks

Kit Features: • Scale : 1:16 • Item Type : Plastic Model Armor Kit • Model Dimension : Length: 530.6mm Width: 222.3mm • Total Plastic Parts : 800+ • Total Sprues : 26 sprue, upper hull, lower hull, and turret • Metal Parts : Shaft, pin, screw • Photo Etched Parts : 2 sheets • More Features : The kit consists of over 800 parts

Andy Hobby Headquarters AHHQ005 US Late WW2 Infantry Soldier Figure Kit

1/16 scale AHHQ007 – British M10 Achillies Highly detailed plastic model. Features Include: • Full body figure • Metal barrel • Individual track links-type 48 tracks • Workable suspension • Detailed gun breech and fighting Compartment.

The Sd.Kfz. 251 (Sonderkraftfahrzeug 251) was a German armoured half-track infantry fighting vehicle from World War II, developed by the Hanomag company on the basis of the unarmoured Sd.Kfz. 11 half-track vehicle. With at least 15252 vehicles and variants produced by seven manufacturers, the Sd.Kfz. 251 became the most frequently produced German half-track vehicles of the war.

ClassyHobby 1/16 Scale German Panzer 11 Light Tank WW2

The kit includes some photo etched brass components and illustrated assembly instructions.

Glue and paints are required 

Merit International 1602 1/16 Scale German K18 105mm Cannon

Dimensions - Length 590mm.

Features include - 2 Directional Slide-molded Gun Trail with Finest Detail - Positional Gun Elevation - Hand Wheels Reproduced with Superb Detail - Optional Fire or Transport Mode - Positional Gun Trails and Detachable Spades - Removable Transport Carriage with Full Detail - Rubber Like Tires with RealisticTread Pattern - Photo Etched Detailing Sheets - Over 450 Parts - Comprehensive Instructions.

Adhesive and paints are required

For this German WW2 Pz.Kpfw II Sd.kfz121 Ausf F Tank Kit
PLASTIC PARTS WORKING SUSPENSION WORKING TRACK LINKS INTERIOR TURRET DETAIL METAL ETCH PARTS DECALS

Universal Carrier MK II Bren Gun Carrier
INCLUDES • Fully detailed drive compartment. • Photo etch parts. • Workable track links. • Decals

Italeri 1/9 German Sd.Kfz 2 Kleines Kattenkraftrad Typ HK 101 7404
Glue and paints are required

1:16 SCALE M4A3E8 Sherman "Easy Eight" with T80 tracks 2 WWII Late options or 3 Korean War options INCLUDES Metal barrel Full body figure Workable T80 track links Workable suspension Decals

1/16 scale AHHQ006 - US M10 TANK DESTROYER Highly detailed plastic model. Features Include: • Full body figure • Metal barrel • Individual track links- T51 type tracks • Workable suspension • Detailed gun breech and fighting Compartment

1:16 SCALE M8 GREYHOUND US LIGHT ARMORED CAR INCLUDES • Metal barrel • Detailed drivers’ compartment • Detailed turret interior • Highly detailed .50cal Machine gun included. • Full body figure • Movable steering • Build as either Early or Late version. • Optional .50 cal. turret ring included.

Trumpeter 00903 1/16th T34/76 Russian Battle Tank Kit

Trumpeters 00911 a large 1/16th scale plastic kit of a US Army M16 Haltrack with Quad Anti aircarft Machine Guns

Length: 413mm Width: 156mm Height: 168mm

25 sprues plus cabs, compartment, chassis, rubber tires, rubber tracks, wheels

Cast metal chassis frames, numerous screws and stamping can mount racks and hinges

M-16, 4th Inf. Div. M-16, 15th AAA Battalion, 7th Infantry Division, 1951 M-16, 21 AAA, Korea, 1953

Trumpeter brings you 00915 a large 1/16th Scale plastic kit of the Russian World War 2 Tank Destroyer SU-100

Length: 583.2mm Width:188 mm

32 sprues containing over 1100 parts with refined detail, individual tracks & Photo-etched parts with full interior detail.

Trumpeter 1/16 PzKpfw IV Ausf J German Medium Tank kit 00922
Glue and paints are required

Trumpeter 1/16 German Sdkfz 186 Jagdtiger Kit 00923
Full interior detail • Individual track links • Photo-etch • L: 657.8mm, W: 235mm, Total parts: 1,500
Glue and paints are required

German SdKfz 251D Half-track, WWII, c.1943. Fourth and final production version of the SdKfz 251 Armoured Personnel Carrier used by all branches of the German military during World War II. Revisions over earlier marks included improved armour protection and an uprated engine. Armed with the 7.92mm MG34 machine gun. 17 sprues, upper & lower hull, individual tracks, rubber tyres, photo-etch. (Figures not included). L: 396.9mm, W: 138.5mm, Total parts: 800+. 1:16 scale plastic model kit from Trumpeter, requires paint and glue.

18 sprues, upper & lower hull. (Figures not included). L: 396.9mm, W: 138.5mm, Total parts 800+. 1:16 scale plastic model kit from Trumpeter, requires paint and glue.

Iconic WWII light utility army vehicle, official designation Truck, ¼-ton, 4x4, command reconnaissance. Workable front wheel steering Detailed engine Wire cutter Choice of 4 markings Figure included 1:16 scale model kit from Takom, requires paint and glue.

Das Werk 16002 German Panzer 111 Ausf JG WW2 Tank Kit
Highly detailed static plastic model 3 versions buildable Workable tracks & suspension 2 5cm cannon metal barrels (Short & Long)* *First production run only 2 engine deck versions (Standard & Africa (DAK))

1300= Parts
Features: • Movable metal cannon • Movable single link tracks • Photo-etched parts included • Lasercut armour plates included • Steel cables included • more than 1300 parts • Six camouflage versions: Pz.Abt.215, 15.Pz.Gren.Div., Sicily 1943 Italy 1944 Normandy 1944 Russia summer 1944 Easternfront winter 1944/45 Berlin 1945

ICM 35713 1/35 Scale Vickers .303 Machine Gun Model -1915 and crew

Dimensions - Length 146mm.

M4A3E8 Sherman "Easy Eight" In its final form the M4 Sherman tank was classified M4A3E8 in testing (Model four, Advanced three, Enhancement eight), and featured new horizontally-mounted suspension (HVSS), wider track, bigger main gun (76mm) and improved protection. In the contemporary US phonetic alphabet, the letter "E" was represented by "Easy" which led to the tank's nickname "Easy Eight". 22 sprues, upper & lower hull, turret, individual track links, metal gun barrel,photo-etch parts. Choice of 4 markings: (1) 8th Armored Div, Germany, March 1945; (2) 35th Tank Battalion, 4th Armored Div, Bastogne, February 1945; (3) 714th Tank Battalion, Germany, Spring 1945; (4) 68th Tank Battalion, Germany 1945. L: 471.6mm, W: 182.6mm, Total parts 1100+

30 sprues, upper & lower hull, turret, individual track links. Detail up set contains resin figure, metal gun barrel, metal machine gun barrel, over 90 photo-etch parts, 3D printed track link guide teeth. Choice of 3 markings: (1) Unknown unit, Germany March 1945; (2) 41st Tank Battalion, 11th Armored Div "Eskimo", Germany March 1945; (3) 41st Tank Battalion, 11th Armored Div "Flat Foot Floogie", first to reach the Rhine River, March 1945. L: 471.6mm, W: 186.2mm. Total parts 2200+

Working suspensions - Openable lid - Higly detailed engine - Higly deteiled decals sheet - Canvas roof and windows - Working canvas roof - Steering front axle - Rubber tires - Colors instructions sheet

Hobbyboss's 82601 1/16th scale Plastic Kit of the Famous German Tiger 1 Tank. This is big! Length 530mm width 222mm

The kit is a two in one kit so you can build either the M113A1 or the ACAV version
The kit includes workable tracks and working suspension, Interior crew cab detail, hatch can be built opened or closed. A 1:16 scale figure is also included

Das model represents the version of the standard personnel carrier, 251/1 Ausf.D. Highly detailed static plastic model Detailed running gear with torsion bar suspension like the original Workable tracks & suspension Full interior including engine Detailed engine with openable engine cover plates Floor plate segments can be displayed individually Interior floor plates detachable Armor with realistic welds made from multiple split armor plates Doors can be built open/closed Swinging front axle with steering angle can be displayed Detailed brake and fuel system 4 marking options

Classy Hobby MC16006 M5 Stuart Light Tank Kit

M5A1 STUART LIGHT TANK EARLY PRODUCTION

The M3 Stuart entered production in 1941 and became the standard light tank for the British and American armies. It was manufactured at only one factory, American Car & Foundry. By 1942 production was falling behind and two new companies began production, Cadillac and Massey Harris. Cadillac re-designed the M3 mount to 2 X Cadillac V-8 auto engines which meant a ne engine compartment and rear hull. The new tank was designated the M5 and entered service in September 1942. Later the turret was re-designed to mount the radio in a rear bustle, this model became the M5A1 entering service in November 1942. At first the M5 and M5A1 were used only by the US Army, while most M3 Stuarts were now built for Lend-Lease. But by 1944 the British and other nations began to be supplied with them in large numbers. The M5A1 was used as a scout tank were its high speed of 58km/h (36mph) could be used as an advantage. It was armer with a 37mm M6 anti-tank gun which was only effective against German light armour. Combat weight was 16.5tons and the armour was from 16.. to 51mm maximum. The road rang was 160 kilometers (99 miles) driven at 40km/h(24mph), a cross-country speed of 29km/h (18mph) could be attained. The M5A1 was replaced by the M24 Chaffee in the US Army from mid-1944, but may soldiered on with other armies until the 1970's