Military Vehicles

Merit Models 1/18 MM60030 German Flak 36 88mm Anti-Aircraft Gun Model
L: 325mm, W: 125mm. **Easy Model 1/72 Tiger I is shown for size comparison!

Dragon Armor 1/72 US LVT (A)1 708th Amphibious Tank Battalion Ryukyus Pacific 1945 60424
The miniature model boasts a complicated suspension system, as well as a well-detailed deck, even the weld seams are visible. The turret is well constructed and boasts a hollowed-out gun muzzle. Painted in realistic colours, this LVT(A)-1 comes in the markings of the 708th Amphibious Tank Battalion. It represents an actual vehicle that participated in the capture of the Ryukyu Islands in 1945.

Dragon Armor 1/72 US LVT (A)1 Amtrac C Company 708th Amphib Batt Saipan 15th June 1944 60499
WWII saw a number of innovative new solutions to meet the demands of modern combat. One such class of military vehicle was the amphibious tractor, often referred to by US servicemen as amtracs. The first such Landing Vehicles Tracked (LVT) were produced by the Food Machinery Corporation (FMC) for the US military. The original military LVT-1 appeared in 1941, but one weakness was its lack of armoured protection, especially in amphibious assaults. The LVT(A)-1 helped rectify this shortcoming, with the A in the nomenclature representing armoured Despite what its name suggests, the LVT(A)-1 was actually based on the LVT-2 and it was employed as a fire support vehicle. It featured an M3 Stuart turret containing a 37mm M6 gun. A total of 510 LVT(A)-1 vehicles were eventually produced. This important amtrac was used at Saipan during the bloody Pacific campaign.

Merit Models 1/16 US M198 155mm Towed Howitzer Model MM68604
L: 468.5mm, W: 166.3mm. **Easy Model 1/72 Tiger I is shown for size comparison!

MAG MZ16 1/43rd Valentine II Infantry Tank MKIII 1941 Tank Model

M4A3 Sherman Tank " Condor " USMC 1st.MARINE Tarawa 1943

Corgi 1/43 Land Rover Series 1 80", 1st Battalion, The Gloucestershire Regiment, Korea, 1951 VA11113
Land Rover Series 1 80", 1st Battalion, The Gloucestershire Regiment, Korea, 1951

Corgi CC60013 1/50th Sdkfz 7 Artillery Tractor Tunisia 1943

Dragon Armor 1/72 German Kfz.70 6x4 Krupp Protze Personnel Carrier Truck 60427
Dragon Armor has come up with a fantastic new German soft-skin vehicle, the first ever in this exciting range! It is a 1/72 scale Krupp Protze truck, with this type of vehicle serving throughout WWII after mass production commenced in 1933. A total of about 7,000 trucks were produced up till 1942. This 6x4 vehicle was powered by an air-cooled 3.308-liter flat-four engine. The horizontal engine gave rise to the trucks distinctive sharply sloped nose and also to its nickname Boxer. The truck was used for all kinds of purposes and it was commonly employed for towing light artillery pieces such as the 3.7cm Pak 35/36 antitank cannon. Dragons new model shows the truck in a slightly different configuration, however, that of a Kfz.70 Personnel Carrier. Utilizing detailed research and moulds from a recently released 1/72 plastic scale kit of the Krupp Protze Kfz.70, this is certainly a delightful truck model. The fully built-up miniature incorporates full detail both above and below the chassis. For example, the wheels and independent coil spring suspension are masterfully represented. The Kfz.70 Personnel Carrier is finished in a typical camouflage scheme of early-war gray, and it is registered with its very own Wehrmacht WH number plate.

Dragon Armor German Kfz.70 6x4 Krupper Protze Personnel Carrier Truck

1/72 Scale

Dragon Armor announced a fully built-up 1/72 scale model of the Schwere Einheits PKW A.U. Horch painted in an early-war panzer grey colour. Now a second version of this soft-skin vehicle is available to collectors. The 4x4 heavy car was produced by Auto Union and Horch from 1938 onwards, and it served in all theaters of WWII. The original Type 1a had four-wheel steering, while the later Type 1b produced from 1940 onwards had regular front-wheel steering. This vehicle possessed four-wheel drive but production ceased in 1941 as part of German efforts to standardize production. The personnel carrier was powered by a V8 Horch engine of 3.823-liter capacity.

Dragon Armor 1/72 German Kfz.70 6x4 Krupp Protze Personnel Carrier Truck 60501
Dragon Armor are following up its earlier announcement of a 1/72 scale Kfz.70 6x4 truck with a second version. This type of vehicle served throughout WWII after mass production commenced in 1933. A total of about 7,000 trucks were produced up till 1942. This 6x4 vehicle was powered by an air-cooled 3.308-liter flat-four engine. The horizontal engine gave rise to the truck's distinctive sharply sloped nose, and also to its nickname "Boxer" The truck was used for all kinds of purposes, and it was commonly employed for towing light artillery pieces such as the 3.7cm Pak 35/36 antitank cannon. However, Dragon's new item shows the truck in its Kfz.70 Personnel Carrier configuration.

Churchill MkIII – 6th Scots Guards Brigade 1943

British Churchill Mk.IV Tank, 'To Catch a Tiger', 'TOLEDO', C Squadron, 14 Troop, 21st (Army) Tank Brigade, Tunisia, April 1943

Corgi CC51032 1/50th M4A1 Sherman 'Beutepanzer'

Corgi CC51606 1/50th Beute Panzer Trophy Tank T34-76 Model 1943

MAG KP03 1/43rd M16 Multiple Gun Motor Carriage USA Model

MAG MZ03 1/43rd Russian KV-1 1941 Tank Model

MAG MZ04 1/43rd Russian T-64V 1976 Tank Model

MAG MZ06 1/43rd Russian IS-2 1943 Tank Model

MAG MZ08 1/43rd Russian SU-122 1943 Tank Model

MAG MZ20 1/43rd British Cromwell Mk.IV 1944 Tank Model

Soildo S7200512 Krupp Protze L2H143 & Pak 35/3 Gun