Peco N Streamline Code 80

Peco Streamline code 80 N gauge track with nickel silver rail provides excellent durability and electrical conductivity. SL300 features a flexible moulded sleeper base representing the wood sleepers.

Also available in 25 yard packs.

Customers outside of the United Kingdom please note that the length of Peco Streamline track exceeds the size limit for delivery.

Peco N 25 Yards Streamline Flexible Code 80 Track Nickel Silver Wooden Sleeper SL-300 BOX
Peco Streamline code 80 N gauge track with nickel silver rail provides excellent durability and electrical conductivity. SL300 features a flexible moulded sleeper base representing the wood sleepers.

A complete box of 25 yards of track. We can also supply SL300 in single yard lengths.
Customers outside of the United Kingdom please note that the length of Peco Streamline track exceeds the size limit for delivery.

A pack of Peco N Gauge 24 Rail Joiners (Fishplates)

Pack of 12 plastic insulating rail joiners for use with peco N gauge code 55 and 80 track.

Medium radius right hand point with insulated frog.
Length 123.7mm 4 7/8in, nominal radius 457mm 18inn. Diverging angle 14 degrees.

Templates for Peco points are available from the Peco website.

Medium radius left hand point with insulated frog.
Length 123.7mm 4 7/8in, nominal radius 457mm 18inn. Diverging angle 14 degrees.

Templates for Peco points are available from the Peco website.

Large radius left hand point with insulated frog.
Length 160mm 6 5/16in, nominal radius 914mm 36in. Diverging angle 8 degrees.

Templates for Peco points are available from the Peco website.

Short crossover crossing with insulated frogs. This was formerly coded ST-7.
Angle 25 degrees, length 91mm (3 19/32in).

Note that the handed crossings, ST50 and ST51, are now available for Setrack layouts where the diverging route crosses a parallel track.

Templates for Peco points are available from the Peco website.

Long crossing designed for a use with large radius turnouts SL-388/9 or SL-E388/9.
Length 187mm 7 3/8in Crossing angle 8 degrees
Due to the frog angle this crossing is not suitable for use with medium radius or Setrack points. Available in a Insulfrog version only.

Templates for Peco points are available from the Peco website.

Curved or double radius left hand point with live frog.
Length 157mm 6 3/16in, outside radius 914mm 36in nominal, inside radius 457mm 18in nominal. Diverging angle 10 degrees.

Templates for Peco points are available from the Peco website.

The purpose of a Catch Turnout is to derail a vehicle before it rolls out of a siding or branch line on to a main line.

Templates for Peco points are available from the Peco website.

Medium radius right hand point with live frog.
Length 123.7mm 4 7/8in, nominal radius 457mm 18inn. Diverging angle 14 degrees.

Templates for Peco points are available from the Peco website.

Medium radius left hand point with live frog.
Length 123.7mm 4 7/8in, nominal radius 457mm 18in. Diverging angle 14 degrees.

Templates for Peco points are available from the Peco website.

Curved or double radius left hand point with live frog.
Length 157mm 6 3/16in, outside radius 914mm 36in nominal, inside radius 457mm 18in nominal. Diverging angle 10 degrees.

Templates for Peco points are available from the Peco website.

An invaluable aid to the accurate laying of Streamline track to correct double track spacing. Both streamline and setrack spacing is catered for. It also gauges correct platform height relative to rail height.

Pack of 2 rail-built type buffer stops. These are supplied in a simple kit form. Use of a suitable polystyrene cement or other plastic adhesive is recommended to permanently fix the parts.

A scale model of the BR AWS (automatic warning system) track installation. Ideal for adding diesel-era track details to your layout.

These ramp shaped units are fitted at a convenient distance from most colour-light type signals, the sounding of the warning alerting the driver to the signal in good time for him to respond to restrictive aspects.

These Power Feed Joiners will help address the worries of soldering that many modellers' have: they're the safe, clean and tidy way of bringing power to the track. Supplied in packs of four pairs, each joiner has a short length of wire securely pre-soldered to it.
The modeller just has to substitute the standard metal joiners for a pair of these where the power feed is required, and pass the wires down through pre-drilled holes in the baseboard. With approximately 8 inches (204mm) of wire on each one there should be plenty of length available to go through most baseboards. In turn these wires can be connected to longer runs of wiring under the baseboard and be taken back to the outlet terminals of the transformer.

Available now, each single pack contains 8 pre-wired joiners (4 red, 4 black)
Suitable for N Scale Code 55 & 80, OO-9/HO2.5 Code 80 rail profiles.

Large radius right hand point with insulated frog.
Length 160mm 6 5/16in, nominal radius 914mm 36in. Diverging angle 8 degrees.

Templates for Peco points are available from the Peco website.

Re-tooled concrete sleeper PECO Streamline N gauge code 80 track featuring improved sleeper detail with a more prototypical sleeper profile, better representation of the Pandrol-style rail clip and even the manufacturers name embossed on the surface.
Flexible track with nickel silver rail, length 36 inches, 914mm.

Medium radius Y turnout with insulated frog.
Length 127mm 5in, nominal radius 762mm 30in. Diverging angle 8 degrees.

Templates for Peco points are available from the Peco website.

Curved or double radius right hand point with live frog.
Length 157mm 6 3/16in, outside radius 914mm 36in nominal, inside radius 457mm 18in nominal. Diverging angle 10 degrees.

Templates for Peco points are available from the Peco website.

The purpose of a Catch Turnout is to derail a vehicle before it rolls out of a siding or branch line on to a main line.

Templates for Peco points are available from the Peco website.

Large radius right hand point with live frog.
Length 160mm 6 5/16in, nominal radius 914mm 36in. Diverging angle 8 degrees.

Templates for Peco points are available from the Peco website.

Large radius left hand point with live frog.
Length 160mm 6 5/16in, nominal radius 914mm 36in. Diverging angle 8 degrees.

Templates for Peco points are available from the Peco website.

Curved or double radius right hand point with live frog.
Length 157mm 6 3/16in, outside radius 914mm 36in nominal, inside radius 457mm 18in nominal. Diverging angle 10 degrees.

Templates for Peco points are available from the Peco website.

Medium radius Y turnout with insulated frog.
Length 127mm 5in, nominal radius 762mm 30in. Diverging angle 8 degrees.

Templates for Peco points are available from the Peco website.

Decoupler unit for use with standard N gauge lifting knuckle couplers.