Rubicon Models

With this model kit, you can assemble the T-34/76 into either a Model 1940, 1941, or 1942 version of the tank.  It comes with 2 gun, 2 turret, 2 hull and 2 road wheel choices.
Number of Parts: 55 pieces / 3 sprues

With this model kit, you can assemble the T-34/85 into either a Model 1943 or 1944 version of the tank.  It comes with 2 turret top and 2 mantlet choices with oil drums & accessories options; and can be built as an OT-34/85 flamethrower tank as an option.
Number of Parts: 50 pieces / 3 sprues

This highly detailed plastic kit builds a Studebaker US6 6x6 truck with a rotating and elevating BM-13N Katyusha multiple rocket launcher.
Number of Parts: 49 pieces / 3 sprues

Expansion kit only. Suitable for use with SdKfz 251 Ausf D kit 280018.
This expansion pack allows the SdKfz 251/22 Ausf D PaKwagon ith a 7.5cm PaK40 (L/46 or L/48) anti-tank gun mounted to be modelled using the SdKfz 251 Ausf D kit 280018.
Number of Parts: 29 pieces with loader and gunner figures

Expansion kit only. Suitable for use with SdKfz 250/251 kits 280018, 280032, 280038.
This expansion pack provides the parts needed to model the reconnaissance variants of the SdKfz 250 and SdKfz 251 half tracks with enough parts to convert 2 vehicles.
Number of Parts: 46 pieces plus 2 figure sprues

Nicely detailed kit for the widely used US Army Willys MB Jeep 1/4ton 4 wheel drive utility vehicle, used as a light truck, staff car, command and reconnaissance vehicle and often fitted with a heavy machine gun to provide fire support/suppression in all theatres.
Number of Parts: 69 pieces / 1 sprue + 2 multi-slide parts + 2 figure sprues

This kit builds either the PaK 38 or PaK 97/37 anti-tank gun. These 7.5cm guns were capable of taking on the Soviet T34 tanks. Includes 5 gun crew figures.

This kit builds either the Soviet GAZ-AA or GAZ-AAA trucks, which were licence built versions of the Ford model AA truck constructed between 1932 and 1950. The kit can be built with open or closed side panels and an optional tarpaulin top is supplied. A M4 Maxim conversion set is available separately.

A comprehensive kit from which any of 10 variants of the Soviet T-26 light infantry support tank can be constructed. The design was based on the inter0war Vickers 6-ton light tank design, with the Russians creating 53 variants during the 1930s.
Number of parts : 85 pieces / 3 sprues

Detailed kit building a model of a SdKfz 2 Kettenkrad light artillery tractor with a detachable Goliath tracked mine, if.8 transport trailer and crew of driver and two seated passengers.

Detailed plastic kit building a model of a Soviet Ba-3 or BA-6 heavy armoured car used mainly in the Finland 'Winter War' campaign and in early engangements with German and Japanese forces.
Number of Parts: 47 pieces / 1 sprue + 1 cab body

The Dodge WC series, sometimes nicknamed 'Beeps', was a range of light military trucks produced by Dodge during World War II. The series included weapon carriers, telephone installation trucks, ambulances, reconnaissance vehicles, mobile workshops and command cars.
This kit builds a model of a WC55 truck, a modified Dodge WC52 mounting a M3A1 37mm anti-tank gun, a combinations designated M6 Fargo Gun Motor Carriage.
Kit features
Highly detailed 37mm M3A1 gun with gun shield
4 figures, driver, officer, gunner and loader
Optional stowage set

• Various ammo boxes for 76mm to 122mm shells
• Various stand-alone 76mm to 122mm shells
• Stacked boxes with tarpaulin cover
• Various fire arms including DP-27, Mosin-Nagant 91/30, PPsh-41, PTRD-41, & PTRS-41
• Various types of radio sets, loudspeaker, and signal flags
• Wine bottle, Molotov cocktail, and wine crates
• Snow sledge, two-man crosscut saw & bucket

Build options include:

• Choice to build a BTR-60PA or BTR-60PB APC
• Most hatches can be assembled open or closed
• Multi-slide mould hulls for easy assembly
• Detailed wheel suspension with rubber wheels
• Soviet crew with PKB machine gun included

Build options include:

• Options to build as a Mk I or Mk III gun
• Can be assembled in transport or deployed mode
• Gun can elevate up and down
• Gun platform can rotate left and right
• Outrigger can swing open or closed
• Extra ammo and gun barrel included
• 4 British gun crew included
• No of Parts: 89 pieces 2 sprues

Ideal for use with any town or city diorama this set contains domestic furniture for the bedroom and the dining area, plus an outdoor French Bistro table set.

45 x2 pieces

The M5A1 light tank was essentially an M5 with the larger turret first introduced on the M3A3. Production began in early 1943, and a total of 6,810 M5A1s were produced. By June 1944, the US Army had almost most entirely switched to the M5A1. It was also used by the US Marines.

The M8 75mm Howitzer Motor Carriage (HMC) was based on the M5 (Stuart) chassis. It was intended to provide indirect fire support for armoured reconnaissance units. A total of 1,778 M8s were produced from Sept 42 to Jan 44. The M8 was used by the US Army and Free French in Italy and Northwest Europe, and by the US Army in the Pacific. Eventually replaced by the M4 (105mm) and M7 Priest, it saw service after WW2 with the French Expeditionary Force in Vietnam & Algeria.

The M8 Greyhound light armoured car entered combat service with the Allies in 1943. It was purpose designed to serve as the primary basic command and communication combat vehicle of the US Cavalry Reconnaissance Troops
Number of Parts: 53 pieces / 2 sprues

A light tank destroyer based on the Czech Panzer 38(t) chassis the JagdPanzer 38(t), commonly known as the Hetzer, was built in considerable numbers for the Whermacht in the later stages of WW2.  This kit will build an early, mid or late production Hetzer, or the rarer flame thrower equipped Flampanzer 38.
Number of Parts: 85 pieces / 3 sprues

This kit builds the early or 'Alte' (old) version of the DEMAG built SdKfz 250 light armoured half track. The kit can also be built as the fully enclosed version, SdKfz 253.
Number of Parts: 62 pieces / 2 sprues

This kit can be built as a Soviet Su-122 self propelled howitzer with a 122mm M-30S howitzer or as a Su-85 self propelled gun / tank destroyer with an 85mm D-5S gun.
Number of Parts: 59 pieces / 3 sprues

Expansion kit only. Suitable for use with SdKfz 250/251 kits 280018, 280031.
This expansion pack allow the SdKfz 251 Ausf C or D half track to be modelled equipped with a flame thrower as a SdKfz 251/16 Flammpanzerwaggen.
Number of Parts: 25 pieces

Expansion kit only. Suitable for use with SdKfz 250/251 kits 280018, 280031, 280032, 280038.
This expansion pack allow the SdKfz 250 or SdKfz 251 half track to be modelled equipped with a mortar, along with a mortar team. Parts are supplied to convert 2 vehicles.
Number of Parts: 44 pieces plus 2 figure sprues

Expansion kit only. Suitable for use with SdKfz 305 Blitz and SdKfz 3A Maultier truck kits 280026 and 280046.
This expansion pack builds a covered box body to fit the SdKfz 305 Blitz truck or SdKfz 3A Maultier half track with a choice of styles to suit the role needed.
Number of Parts: 41 pieces / 1 sprue

This kit builds a German 7.5cm PaK 40 anti-tank gun with a set of 5 gun crew figures, shell and ammunition case details. These guns were introduced from late 1941 and used until the end of the war.
Number of Parts: 71 pieces / 3 sprues + 1 cab body

This kit builds a M4 Sherman tank fitted with the British long barrel QF 17-pounder anti-tank gun in place of the original American short barrel gun. Firefly tanks were often mixed with standard Shermans to provide units with a powerful anti-tank weapon.

Based on the Panther chassis the SdKfz173 Jagdpanther was a heavily armoured tank destroyer with the long barrelled 88mm PaK 43/3 gun mounted in the hull. This kit allows either the Ausf G1 or Ausf G2 versions to be built with choices of three mantlets and two gun barrels.

This kit for the US amphibious LVT Landing Vehicle Tracked builds either the LVT-2 Water Buffalo, known as Buffalo II in British service, or the armoured version, the LVT(A)-2.
Number of Parts: 76 pieces / 3 sprues

Introduced in 1945 the Centurion was the primary British Army main battle tank of the post-World War II period. It is widely considered to be one of the most successful post-war tank designs, remaining in production into the 1960s and seeing combat in the front lines into the 1980s. The chassis was also adapted for several other roles, and these have remained in service to this day.

Kit features:
- Option to build either an Mk 3 or Mk 5 variant
- All hatches can be open or closed
- With or without side skirts
- Opted for WW2 or the Korean War
- Tank commander included

Introduced in 1945 the Centurion was the primary British Army main battle tank of the post-World War II period. It is widely considered to be one of the most successful post-war tank designs, remaining in production into the 1960s and seeing combat in the front lines into the 1980s. The chassis was also adapted for several other roles, and these have remained in service to this day.

Kit features:
- Option to build either an Mk 5 or Mk 5/1 variant
- All hatches can be open or closed
- With or without side skirts
- Optional dozer blade
- Options for Post-WW2 or Vietnam War
- Tank commander included

Detailed plastic model kit building a German SdKfz 10 half track artillery tractor.
The SdKfz 10 (Sonderkraftfahrzeug – special motorized vehicle) was a German half-track that saw widespread use in World War Two.  Its main role was as a tractor for small towed guns, such as the 2cm FlaK 30, the 7.5cm leIG, or the 3.7cm PaK 36 anti-tank gun. The SdKfz 10 had seats for eight troops, carrying a crew for the towed gun.
Number of Parts: 97 pieces / 3 sprues

Build options include:

• UH-1D or UH-1H with full interior
• Troop & Cargo Transport
• MEDEVAC with 6 stretchers
• Side doors can be assembled open or closed
• Clear window parts included
• Cabin Weapons including M60D & M213 MMG, M134 minigun & M129 grenade launcher
• Armament Subsystems including M134 minigun, XM157 missile pods & M60C MMG
• 2 US pilots & 2 gunners in Vietnam War era uniform included<li"Tilt & Swivel" support (without base or stand)
• No of Parts: 222 pieces / 6 sprues

Build options include:

• Choice to build a T-54-2, T-54-3, T-54-A, or T-54B MBT
• T-54B has early, mid, and late production options
• All hatches can be open or closed
• Driver hatch has an armoured windshield option
• All round detailed OMSh track links
• 12.7mm DShK heavy machine gun included
• Soviet crew with post-WW2 or Cold War head gear
•  No of Parts: 219 pieces 4 sprues

• NVA figures per box
• Includes 5 identical sprues (6 figures each) and 1 command sprue
• Option to build a NVA command squad including flag bearer and bugler
• Contains different webbings and pouches with PRC-10 radio set
• Weapons include Type 56 assault rifles, SKS carbines, RPG-7, M1911A1 pistol, and RPD machine gun
• 30 x 25mm round lip bases included
• No of Parts: 424 pieces 5 identical sprues + 1 command sprue + 30 25mm round lip bases

• 30 figures per box
• Includes 5 identical sprues (6 figures each)
• Includes multiple Caucasian and African head options
• Contains different webbings and pouches with PRC-25 radio set
• Weapons include M16 rifles, M203 & M79 grenade launchers, and M72 LAW
• 30 x 25mm round lip bases included
• No of Parts: 455 pieces 5 identical sprues + 30 25mm round lip bases

This model kit depicts the late version of the Panther tank.  About 3,000 were produced between March 1944 and April 1945.  With this kit, you can assemble a Panther Ausf G with optional air cooler and rear exhaust choices, with or without side armour.
Number of Parts: 53 pieces / 3 sprues

This highly detailed plastic kit depicts a SdKfz 251 Ausf D with a Wurfrahmen 40 multiple rocket launcher.  The Wurfrahmen 40 frame is detachable enabling you to revert the vehicle into a standard SdKfz 251/1D personnel carrier.
Number of Parts: 70 pieces / 3 sprues

Stowage for German armoured vehicles.
Number of Parts: 94 pieces / 2 identical sprues

This 3 sprue kit enables you to build six variants of the A15 Crusader, including the Mk I / I CS / II / II CS / III / AA (Mk II/III), the CS standing for Combat Support, with a 3 inch howitzer in the turret instead of the 2-pounder.
Number of Parts: 70 pieces / 3 sprues

This kit for the 3-ton Opel Blitz truck includes a single piece engine & driver cab for ease of assembly and model integrity without scarifying details. It also comes with a detachable canvas top with an open or close rear tarpaulin, optional benches, searchlights, spare tire, under-carriage storage boxes and fuel cans. Driver and passenger included!
Number of Parts: 49 pieces / 2 sprues

The M10 Tank Destroyer, christened Wolverine by the British, was based on the chassis of the M4 Sherman tank fitted with the 3-inch (76.2 mm) M7 Gun. The M36 Jackson was an up-gunned M10 with a powerful 90mm gun.
Number of Parts: 66 pieces / 3 sprues

This highly detailed plastic kit depicts an SdKfz 251 Ausf C version.  It comes with two machine gun choices; open or close rear access door, and a half open or fully closed canvas top (tarp) option. Base kit for a number of optional expansion packs.
Number of Parts: 2 sprues

This highly detailed plastic kit builds the long wheelbase version of the Studebaker US6 2½ ton 6x6 truck, either without a winch (model U3) or with (model U4). The kit includes the metal cab (moulded as a single piece) and optional canvas canopy, as well as a choice of an open or closed rear tarpaulin cover and tailgate.
Number of Parts: 34 pieces / 2 sprues

The SdKfz 250 was a light armoured halftrack built by DEMAG for use by Germany in World War II. Most variants were open-topped and had a single access door in the rear. Production of the later Neu (new) version SdKfz 250 commenced in autumn 1943.
Number of Parts: 69 pieces / 2 sprues

Expansion kit only. Suitable for use with SdKfz 250/251 kits 280018, 280031, 280032, 280038.
This expansion pack provides the parts needed to model the Funkpanzerwagen communications version of the SDKfz 250 or SdKfz 251. These were often used as command vehicles, i8ncluding the famous Grief used by Rommel in the North Africa campaign.
Number of Parts: 46 pieces plus 2 figure sprues

The M4A3, powered by the excellent Ford GAA V8 engine, was the US Army’s preferred Sherman variant. It began to replace other Sherman types in US Army service in 1944. This kit contains the parts to build either an early or late version of the M4A3(76mm)W, or M4A3E8 with HVSS suspension. It also includes an optional set of tracks fitted with extended end connectors. The hull and cupola hatches are separate, and a commander figure and stowage items are included.
Number of Parts: 115 pieces / 4 sprues

Expansion kit only. Suitable for use with SdKfz 250/251 kits 280018, 280031, 280038.
This expansion pack supplies the parts needed to convert SdKfz 250 or SdKfz 251 half track kits to the SdKfz 280/8 or SdKfz 251/9 self propelled gun with 75cm short barrel howitzers. Parts are supplied to convert 2 vehicles.
Number of Parts: 41 pieces plus 2 figure sprues

Expansion kit only. Suitable for use with SdKfz 250/251 kits 280018, 280031, 280032.
This expansion pack allow the SdKfz 250 or SdKfz 251 half track to be modelled equipped as a tank hunter with a 2.8cm sPzB 41 anti-tank rifle. Parts are supplied to convert 2 vehicles.
Number of Parts: 51 pieces plus 2 figure sprues

This kit builds a German SdKfz 3a Maultier half track truck, based on the 3 ton Opel Blitz truck. The trucks were modified to half-tracks to provide vehicles better suited to the very poor road conditions on the Eastern front.
Number of Parts: 71 pieces / 3 sprues + 1 cab body

British and commonwealth forces version of the Willy Jeep kit designed to replicate Jeeps used by the SAS (Special Air Service) raiding parties and LRDG (Long Range Desert Group) reconnaissance teams with a range of optional vehicle-mounted weaponry.
Number of Parts: 68 pieces / 1 sprue + 2 multi-slide part + 2 figure sprues

This kit builds a model of the BMW R75 motorcycle with side car, as used by despatch riders and patrols of the German Wehrmarcht. Optional leather or metal stowage cases and a choice of MG34 or MG42 machines guns are provided.
Number of Parts: 45 pieces / 1 sprue + 2 figure sprues

This kit builds a model of the BMW R75 motorcycle with side car, as used by the Afrika Korps (DAK Deutsches Afrikakorps). Optional leather or metal stowage cases and a choice of MG34 or MG42 machines guns are provided.
Number of Parts: 45 pieces / 1 sprue + 2 figure sprues

Expansion kit only. Suitable for use with US/Allied M3/M3A1 half track kit 280027.
This expansion pack provides the parts needed to model the M21 MMC Mortar Motor Carriage, a M3/M3A1 half track fitted with an 81mm mortar and Browning machine gun. Includes tarpaulins for both half track versions.
Number of Parts:44 pieces / 1 sprue + 3 figure sprues

This kit builds a model of the British CMP 15cwt cargo truck, a type made in Canada for British and allied commonwealth forces which saw service in campaigns and on the home fronts across the world. Optional open or closed hatches and tarpaulin covers are supplied.
Number of Parts: 57 pieces / 2 sprues + 1 cab body + 1 tarpaulin top

Detailed model kit building a German 3.7cm PaK 36 anti-tank gun with crew.
The PaK 36 (Panzerabwehrkanone 36) was the main anti-tank weapon of Wehrmacht infantry units until mid-1941.
Number of Parts: 60 pieces / 1 sprue + 2 figure sprues

This kit provides the parts needed to build several variants of the M4 Sherman tank with both high and low bustle turrets, guns for standard or Firefly 1C, multiple mantlet choices, open or closed hatches and crew figure set.

This kit can be built as either a SdKfz 222 with 20mm KwK L/55 cannon or SdKfz 223 with frame radio antenna light armoured scout car. The kit also porvides the base vehicle for conversion to the unarmed SdKfz 260/261 radio communications vehicles.

This kit builds a model of the US amphibious Landing Vehicle Tracked LVT-4 Water Buffalo, known as Buffalo IV in British service, a redesigned LVT with rear ramp access for rapid unloading of cargo and troops.
Number of Parts: 85 pieces / 4 sprues

This kit builds a model of the famous German 88mm FlaK anti-aircraft gun, which also proved highly effective as an anti-tank weapon. The kit can be uised to model the FlaK 36 or FlaK 37, dismounted or mounted on the SdAh 202 carriage. Crew figures, new and spent shells and ammunition crates are supplied.
Number of Parts: 206 pieces / 4 sprues

Detailed plastic model kit building a German Kubelwagen light military vehicle. These were used in the same way as the US Jeep as staff cars and light transports.
Number of parts : 49 pieces / 1 sprue

Kit to build a model of a German 3.7cm FlaK 43 anti-aircraft gun with SdAh 58 trailer and crew. Kit can be built with the gun deployed or loaded on the transport trailer.

Detailed model kit building a 1:56 scale Chevrolet 30cwt truck, based on the vehicles operated by the British Long Range Desert Group (LRDG), a covert reconnaissance unit operating in North African desert during WW2.

Model kit of the Panzer IV which can be built as either Ausf D or Ausf E variants with a choice of open or closed hatches and a range of optional stowage details.

Plastic model kit of the final version of the German Panzer IV, the Ausf J. These late war tanks incorporated developments through the earlier variants, but despite attempts to address the slow speed of the now heavier Panzer IV due to the simplified construction the Ausf J was not considered the best of the type.

Detailed plastic kit building a model of a German Krupp Protze Kfz 69/70 6x4 truck and artillary tractor. The Kfz 69 was intended to tow a PaK 36 anti-tank guns, while the Kfz 70 was for motorised infantry.
Number of Parts: 87 pieces / 2 sprues

Detailed plastic kit building a model of a Soviet BA-10 heavy armoured car, the most produced Soviet pre-1941 heavy armored car with 3,311 built in three versions.
Number of Parts: 50 pieces / 1 sprue + 1 cab body + 1 turret

This kit builds a M4A1 Sherman tank fitted with the short barlel 75mm gun.
Optional parts allow the model to be built as a Direct Vision (DV) or Small hatch (SH) version with a choice of low or high bustle turret and multiple gun manlet options. Open or closed hatches can be fitted and tank crew figures are supplied.

This kit builds a M4 Sherman tank fitted with the long barrel 76mm gun.
Kit includes both early and late production T26 turrets, open or closed command and crew hatches and tank crew figures.

This kit builds a M4 Sherman tank fitted with the British long barrel QF 17-pounder anti-tank gun in place of the original American short barrel gun. Firefly tanks were often mixed with standard Shermans to provide units with a powerful anti-tank weapon.
This kit includes the option to build a Sherman V or VC Firefly with open or closed hatches. Tank crew figures supplied.

Stowage set for British Commonwealth and allied forces.
Number of Parts: 96 pieces / 2 identical sprues

This kit can be built as several varients of the German Panzer 3 medium tank with parts to complete the model as asuf H (5cm KwK 38 L/42 gun), J (extended engine bay), L (5cm KwK L/60 gun), M (with deep wading equipment) or N (short barrel 7.5cm KwK 37 L/24 gun).

Plastic model kit to build one Italian Semovente da 75/18 self-propelled gun with optional parts to allow hatched to be modelled open or closed.
Tank crew figures included.

Plastic kit to build one Valantine tank with options to finish the model as Mk.IX, X or XI.
Choice of mudguards and open or closed command and crew hatches.
Commonwealth and Russian tank crew included.

Detailed plastic kit building a model of a Bedford QLT, the troop transport variant of the Bedford QL type 3-ton 4x4 truck.

Number of Parts: 82 pieces - 3 sprues + 1 multi-slide mould part

• Panzerschreck, Panzerfaust, and storage crates
• Hafthohlladung, M24 stick grenade & carrying case
• Tellermine 35 and 42 with carrying case
• Various firearms including MP40, Kar98K, MG15 & DT15 magazines
• Tank C-hook with various 5t, 10t, 15t, and 20t lift jacks
• Various tools including pickaxe, wire-cutter, axes, hammers & shovel
• Various tarpaulins including camo nets and canvas rolls
• Bicycle "Truppenfahrrad" & Torn.Fu.d2 field radio set
• Various infantry webbing including water bottle, field canteens, bedroll, shovel, and knapsack
• M39 jackboots & M43 low boots

Developed for wargamers who require robust, quick assembly models to build up a tank squadron, this kit builds two Russian JS-2 Stalin WW2 heavy tanks. Each model consists of just 11 parts.

Part of the 'Fast Assembly Kits' range, these kits have been designed especially for simulation games, the fast assembly of these models are made up of a few pieces. Despite their practical characteristics and simplicity of assembly, they are still precise and well detailed.

Kit contains two models, model length 123mm.