To give you a better experience, we use our own and third party cookies,
You can read all about them in our cookie policy.
Article on the use of concertina support panels on Woodland Scenics website. (Opens in new tab/window)
�This 2% Incline Set has eight sections that raise the elevation of your track from zero to four inches in 16 feet. Incline Sets allow smooth transition from one height to another. To install Inclines, center on the Risers, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) are the fastest way to assemble your layout, but you can also use Foam Tack Glue (ST1444).�
This package includes four 2.5in risers each 24in long. These risers are 0.25in thick, designed to allow a road to be added to the sub-terrain scenery base.See Woodland Scenics website for information and video guides on the use of the sub-terrain construction system.
This package includes four 1/2"x24" Risers that are generally used with Incline Starters to create varying grades on your layout. Risers are easily flexed to form curves and can be used on plywood or a foam base. To install, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445, and Glue Sticks ST1446) is the fastest way to assemble your foam base, but you can also use Foam Tack Glue (ST1444).
�This package includes four 1"x24" Risers that are generally used with Incline Starters to create varying grades on your layout. Risers are easily flexed to form curves and can be used on plywood or a foam base. To install, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445, and Glue Sticks ST1446) is the fastest way to assemble your foam base, but you can also use Foam Tack Glue (ST1444).
 This package includes four 2"x24" Risers that are used to elevate your track. Risers are easily flexed to form curves and can be used on plywood or a foam base. To install, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445, and Glue Sticks ST1446) is the fastest way to assemble your foam base, but you can also use Foam Tack Glue (ST1444).
 This package of eight 2% Incline Starters raise elevations of your track 1/2 inch in 24". Incline Starters allow smooth transition from one height to another. To install Inclines, center on the Risers, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) are the fastest way to assemble your layout, but you can also use Foam Tack Glue (ST1444).
This package includes four 3/4"x24" Risers that are generally used with Incline Starters to create varying grades on your layout. Risers are easily flexed to form curves and can be used on plywood or a foam base. To install, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445, and Glue Sticks ST1446) is the fastest way to assemble your foam base, but you can also use Foam Tack Glue (ST1444)
This package of six 3% Incline Starters raise elevations of your track 3/4 inch in 24". Incline Starters allow smooth transition from one height to another. To install Inclines, center on the Risers, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) are the fastest way to assemble your layout, but you can also use Foam Tack Glue (ST1444).
1/4" Foam Sheets work great for creating tunnels with curves. They are 12" wide x 24" long. Pin with Foam Nails (ST1432) and glue in place with the Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) or Foam Tack Glue (ST1444).
Woodland Scenics underlay is a flexible closed cell foam material with a surface finish resembling a rubber sheet. This is a long-life material which remains flexible and won’t dry out or become brittle. It provides an excellent resillient track bed significantly reducing the transmission of sound and vibration from the trains through to the baseboard structure.Install Track-Bed with Foam Tack Glue, pin in place with Foam Nails.Each sheet measures 24 x 12 in. (600 x 300mm approx), 5mm thickness.