Track Fixings & Underlay

For OO and N Gauge

Blackened mild steel pins, 14mm (9/16") long. For fixing most Streamline track gauges to wood fibre board (Sundeala) or similar baseboard surfaces.

Note that these are fine pins, not nails and cannot be driven with a hammer. We recommend drilling through sleepers with a 0.5 or 0.7mm drill. When using plywood or chipboard continuing drilling into the board to get the pin started. The pin can normally be driven home with pliers or a small hammer.

25-gram bag of thick type track fixing nails, similar to the Hornby track pins.
Approx 400 pins in each bag.

Cork sheet offers an alternative to pre-shaped underlay rolls. Offering great sound insulation, cork can be cut into track wide strips, and manipulated to fit a layout. Generally 1/16th inch is used for 'N' gauge track, and 2.5mm thickness for 'OO' gauge layouts.

Expo 2mm Pin Pusher Tool 75110
751-10 EXPO High Quality Pin Pusher.
2mm - for fine model railway track pins & modelling pins used on model boats.

Expo 3mm Pin Pusher Tool 75120
3mm - for heavier ship building pins and thicker model railway track pins such as Hornby.

From Expo, Javis or Tasma, Cork sheet offers an alternative to pre-shaped underlay rolls. Offering great sound insulation, cork can be cut into track wide strips, and manipulated to fit a layout. Generally 1/16th inch is used for 'N' gauge track, and 1/8th inch thickness for 'OO' gauge layouts.

Screwdriver designed to be used with track screws.

Golden Valley Hobbies N Gauge Quick Ballaster GVQBN
The Quick Ballaster is the only tool required to both apply ballast to the track, forms a realistic ballast shoulder along the track edge AND ensures the track sleepers are all swept clean. It means these three tasks now take mere seconds, letting the modeller glue his ballast straight away.

The Quick Ballaster is available in all popular track gauges with versions available for the popular OO and N scale, but also all other commercial track gauges from Z to G. Supplied flat packed, with simple instructions to assemble and get working in a few moments. We recommend a liquid poly type glue (not supplied) to make the assembly permanent
The Quick Ballaster name is Trade Marked.
Quick Ballaster  manufactured in the UK.

Golden Valley Hobbies OO Gauge Quick Ballaster GVQBOO

The Quick Ballaster is the only tool required to both apply ballast to the track, forms a realistic ballast shoulder along the track edge AND ensures the track sleepers are all swept clean. It means these three tasks now take mere seconds, letting the modeller glue his ballast straight away.

The Quick Ballaster is available in all popular track gauges with versions available for the popular OO and N scale, but also all other commercial track gauges from Z to G. Supplied flat packed, with simple instructions to assemble and get working in a few moments. We recommend a liquid poly type glue (not supplied) to make the assembly permanent
The Quick Ballaster name is Trade Marked.
Quick Ballaster  manufactured in the UK.

Longer track screws designed to be used on model railways and specifically flexible track. Better hold than nails and pins Allows easy removal without damaging the track. Easier and safer to fit than pins as they do not require a hammer. Characteristics: 10mm long (3/8in): enough to go through the sleepers and thick underlay. Self tapping: will create their own thread into the wood No pre-drilling required unless screwing into hard wood. Blackened: will not show in the middle of sleepers. Size: correct size to fit through holes in Peco and Hornby track. Recommended for OO, HO and On30 track. Each bag contains approximately 100 screws:

Pack contains approximately 130 pins

Pack of 6 lengths of code 60 flat bottom rail. Length 609mm/24in.

Flat bottom rail section (left)
A 1.57mm 0.062in
B 0.76mm 0.030in
C 1.24mm 0.049in

Rail can be used with IL-120 OO scale conductor rail insulator chairs.